Technical parameters of anticorrosive wood foam toilet

1 foam type public toilets frame: light steel keel frame structure, there are lifting, easy to install, transport.

2. Foam type toilet size: Toilet appearance size: long * wide * high and is more than or equal to 1200*2200*2850 management dimensions: length * width * high and is more than or equal to 1500*2200*2850.

4. Foam type toilet internal construction: facilities, clean and tidy appearance, reliable lock, hanging hook strong, toilet between environmental protection board, waterproof, corrosion resistance, flame retardant, insulation.

5 foam type toilet design: public toilets need to configure the barrier free access and stainless steel. Japan carved metal composite plate is used as the outer wall material, exterior modelling beautiful generous, smooth lines, reflect modern breath, and modern urban landscape coordination.

6 foam material: Wall toilets by Japanese carved metal used for interior wall insulation board, aluminum plate, 50mm insulation layer. The roof of Owen Svard, no leaks, rain leakage, internal ceiling. Non slip surface.

The bottom beam adopts steel welding structure, no deformation, stable and reliable.

7 foam type public toilets logo: Toilet outside the set of male and female signs. Public toilet in Chinese and english.

8 foam type public toilet exhaust system: the use of natural ventilation and forced ventilation in two ways, forced ventilation volume is not less than 40m3/h.

9 foam type public toilets lighting: the use of energy-saving lamps. Distribution system to ensure safety, voltage unified for the rated AC220V. A high degree of self-control, the system is stable and reliable, simple operation, toilet electrical equipment are less than DC12V. Electrical insulation: insulation resistance > 1M, voltage resistance 500V continuous 1min no breakdown, burning.

10 foaming type public lavatory management room: window, electric control box.

11 foam type toilet with: the foam quality is stable and reliable, the foam is small, high tension. Foam type squatting pan structure requirement: foaming system and squatting closet structure as a whole modular foam type squatting pan. Toilet with dimensions: squat toilet device is more than or equal to length * width * high 650*430*205 mm foam type of squat will, material: better than or equivalent to 304 stainless steel (0Cr18Ni9), plate thickness equal to or greater than 1.5 mm. Squatting over 150kg static load and dynamic load is more than 100 kg without visible damage or deformation. To prevent the odor from backflow mechanism opening and closing flexible, accurate and reliable, can be seen from the above repair or replacement. A reasonable structure, stretch forming, smooth surface, smooth stool decline.

12 public toilets: foaming foam covering rate greater than 80%. Foam coverage is less than or equal to 30mm. The foam height is always lower than the squatting foot surface 10 mm, completely covered with feces ability (initial foaming time) = 30s. Fast foaming capacity is less than or equal to 120s.

Daily water consumption (in 18 hours) < 5L < 0.15L, foaming agent.

13 foam toilet technology: intelligent operation. Temperature control, fault warning etc. are controlled automatically.

14 the heat preservation of public toilets: the installation of the automatic temperature control system of the infrared radiation heating device for each toilet seat and management. To ensure the normal use of winter.